"I rarely use the 45 mm. I am a 60 mm person, so therefore my 45's are going to stay sharp for a long time, from lack of use. But I have been using the heck out of my 60 mm and it is still sharp. And still going."
– Judith Morton, verified customer
You already own a good rotary cutter. That is not the problem.
The problem is the blade that came in the box. The biggest names in rotary cutters do not put their best steel on the blade they ship you, and they have no reason to. The cutter is sold once. The blades are what you come back and buy again, and again, at a price that has very little to do with what they cost to make.
We got tired of paying it. We were quilters buying our own blades at those prices, watching an edge go dull halfway through a project, and reaching for the wallet again. So we stopped buying them and started making our own.
Why 60mm
The 60mm is the blade you reach for when the cut is long and the stack is thick. Cutting backing down to size. Squaring up a finished quilt. Slicing strips off a folded width of fabric where a smaller wheel starts to drag on the last layer.
A bigger wheel covers more distance per turn and carries more of its own momentum through the cut, so it wants to keep going in a straight line instead of wandering off the ruler. That is exactly what you want on a long cut, and exactly why it is the wrong blade for a tight curve. If you cut curves and applique, the 28mm is the one you want, and we stock that too.
What quilters cut with our blades
We did not run these tests. Quilters did, on their own channels, with their own fabric.
Mary B lined up three blades on the same cotton and kept adding layers. The cheap blade gave up at four. A brand new name-brand blade reached twelve, but she had to lean on it. Ours went through the same twelve, in her words, easily. Mary Go Round Quilts cut ten layers in one pass and said it went through like butter. Jackie Loos took eight layers of cotton, then three of batting, then three of denim, and said she barely used any pressure.
Those tests were on the 45mm. The 60mm is the same steel and the same coating, on a bigger wheel, for the cuts a 45mm has to work at.
Why the edge holds
Every blade is titanium coated SKS-7 tungsten steel. The coating is harder than the steel underneath and it cuts friction at the edge, so the edge keeps its shape long after an uncoated blade has rounded off. That is why these blades last far longer than regular blades. It is not a slogan. It is what the coating does.
Less force, and who feels that most
A dull blade makes you push, and a 60mm cut is a long one. You press harder, you run the cutter back over the same line, and by the end of a long session your hand and your wrist know exactly what you have been doing.
If you quilt with arthritis or fibromyalgia, that force is not just tiring. It is often what decides whether you finish the session or put the project away for another day. A sharp edge does the cutting so your hands do not have to.
Why ten of them
Think about when you actually notice a blade has gone dull. You are halfway through a stack, the cut skips, and you go back over it. You know exactly what is wrong. And you carry on anyway, because the spare blade is not in the drawer, it is four days away in a delivery van.
That is how most of a quilter's cutting gets done: on a blade she already knows is finished.
Ten blades ends that. You change it the moment it starts to skip, because there is another one right there, and the one after that. No rationing. Ten also brings the price per blade down to a number the big brands cannot come near.
-
Built for the long cut. The 60mm carries through backing, batting and folded yardage where a smaller wheel starts to drag.
-
Less force on your hands. The edge does the cutting, so your grip does not have to.
-
Titanium coated SKS-7 tungsten steel. A harder cutting edge that resists corrosion and holds its shape through project after project.
-
Ten blades in one box. A sharp edge is always within arm's reach, so you change the blade when it needs changing instead of when it is convenient.
-
Fits the cutter you already own. Standard 60mm blade with a round centre hole, no adapters and no fiddling.
-
60 day satisfaction guarantee. Cut with them for two months. If you find a blade that beats ours, tell us and we refund you in full. Keep the blades.
Specifications
- 10 blades per pack
- Size: 60mm
- Round centre hole, the standard fit for rotary cutters
- Titanium coated SKS-7 tungsten steel
- Supplied in 1 plastic storage container
Put one in your cutter, make the first long pass, and see what your hands tell you. The other nine will be waiting.
